SCS CONCEPT’s new office is located in Yongli Building on Zhongren Road in Shanghai, where the automotive industry is located, with easy access to the city’s major districts
SCS Concept © Copyright 2018 | legal notices | policy privacy | SCR policy
After spending 17 years in the Montbeliard area where our activities have been very much linked to the automotive industry, we as SCS Concept have decided to leave our historical headquarters
SCS Concept Americas calibration laboratory reached the accreditation for Torque & Angle! On February 23rd, 2022, became an ISO/IEC 17025:2017 Accredited Laboratory for Torque & Angle Calibration. This new accreditation
SCS Concept is the first Italian Laboratory to Reach Accreditation for Angle Calibration of Torque / Angle Tools! SCS Concept Italia has reached the angle calibration accreditation from ACCREDIA, the
SCS Concept has launched a new solution for a production and rework station, used on aeronautic application. Station equipment: FIM EVO, universal multi-brand controller: one controller to drive all the
SCS Concept has now develop a customized system to assemble airplane engines. This system features a high torque power tool coupled with a precision laser system, to tighten to torque
SCS Concept has launched a new solution for illumination on the FTY bench. There are three illumination devices for different purposed: Bench profile illumination Front and bottom illumination Bench surface
The Freedom4 Production is the first electronic wrench in the world which obtained the Volkswagen XML 2.1 certification on board. The communication is direct and does not require any additional
SCS Concept is partner of Energica Motor Company SPA, which is Single Manufacturer for FIM Enel MotoE World Cup. Energica Motor Company S.p.A. is the first Italian manufacturer of supersport electric
SCS Concept has launched a special solution to test torque robots on the assembly line: The system works as a mock-up of the car frame. It moves on the production
Geolocation – Keep your tools tracked. SCS Concept has launched a new solution track tools in the factory or in a production station...
Freedom4, the new SCS Concept intelligent torque & angle wrench, provides this unique new function: obstacle detection! This patent pending feature advices the operator if the wrench body hits an
Freedom4 is now ready to be launched and what best opportunity to use it during the Kawasaki Puccetti Racing test in Portugal. With this new torque & angle wrench we
The main innovations on this bench are: - Automatic test of torque multipliers - Possibility to test the torque multiplier with the click wrench used to make the real tightening - Automatic test with no need of operator This product has been developed for aeronautic industry, but can suit as well any industrial industry where torque multipliers are used, typically for high torque applications (for example valves or high torque tightening in construction).
In cooperation with scientific institutes the German Fastener Association (DSV) offers as a post-gradual (technical engineering) qualification to become a fastening engineer (DSV)®. The SCS Concept Academy is proud as
SCS Concept has opened in China. The new site will support locally all of the customers and expand the Chinese market.
In cooperation with scientific institutes the German Fastener Association (DSV) offers as a post-gradual (technical engineering) qualification to become a fastening engineer (DSV)®. The SCS Concept Academy is proud as
What a great event! More than 200 fastener engineers and professionals in one place – The 13th Fastener Assembly Workshop in Dresden. Thanks to the team of the German Fastener
After a three year break the assembly congress of the VDI (Association of German Engineers) is back. This time it addresses the following topics with relevant for the fastening industry:
2019-03-13 – DSV Industrial Fastening & Assembly Workshop The bi-annual congress in the field of industrial fastening & assembly, hosted by the DSV – German Fastener Association – is the
As we founded our company for high-quality measurements- and testing-equipment in 2005, the initials of the names Silvio, Carlo und Sam stands for our constant personal commitment. This has not changed until today - but much has developed. Our partner company Q-direct in Germany, specialized in Manufacturer Independent Consulting and ISO 9001 certified joined us 2007. With changing the the name from Q-direct Gmbh to SCS Concept Deutschland GmbH it is now also visibly part of our international group.
SCS Concept has launched on the market the new positioning system.
At Motek 2018 (08.-11.10.18) we will be presenting a completely new side to you – all sides
SCS Concept Italia has reached the accreditation from ACCREDIA, the Italian accreditation office, as Calibration Accredited Laboratory for torque, in conformity with UNI CEI EN ISO/IEC 17025 and to the ACCREDIA requirements.
Great success for SCS Concept at MECSPE 2018, the exhibition dedicated to the handling, assembly and factory automation, which took place from 22nd to 24th March 2018 at “Fiere di Parma”...
SCS Concept has launched a special bench for power tools test, with an enhanced swing arm
SCS Concept is proud to announce the acquisition of TECNOGI, now part of the SCS Concept Group. TECNOGI designs and manufactures dynamometric wrenches for over 20 years.
SCS Concept has launched the restyled FTY, dynamic power tool and wrench tester, with new design and improved functions. New black design New lights system One LED ring for
SCS Concept will be exhibiting at ASSEMBLY SHOW in Chicago, from the 24th to 26th October 2017 at Rosemont, Illinois, USA. The Assembly Show is an exclusive and unique exhibition of the
SCS Concept was in the first participation at the Airshow “Salón du Bourget”, with a stand presenting a sample of very interesting products for the aerospace industry, like AWT bench,
SCS Concept, with the partner DMG Torino, will be present at EXPOMAFE Brazil 2017, the exhibition dedicated to the handling, assembly and factory automation from 9 to 13 May 2017
SCS Concept, with the partner DMG Torino, will be present at Motek Italy 2017, the exhibition dedicated to the handling, assembly and factory automation from 23 to 25 March 2017
La soluzione SCS Concept per il test delle rivettatrici, composto di trasduttore di forza e analizzatore elettronico.
SCS Concept and DMG Torino have launched a new high-tech application, which projects visual instructions to guide the operator through the production process. The system is composed
SCS Concept and Q-direct participated to Motek 2016, the world’s leading event in the fields of production and assembly automation, feed technology and material flow, streamlining through handling technology, and
SCS Concept presented a special FTY with support for tools spindles. This accessory fix to the bench a spindle that cannot be handled by hands.
SCS Concept has launched a new multichannel torque/angle analyzer. It is developed to test multi-spindle tools. The number of channels can be customized, up to 12 channels. It supports all SCS
SCS Concept is Ducati Official Supplier 2016. Ducati Official Suppliers are a selected group of companies that – by supplying quality products and services to us – contribute
SCS Concept Latin America Ltda was born in early 2016. The new site is located in San Paolo, Brazil, responsible for all the countries in America Latina, where SCS Concept will increase its business
SCS Concept Americas, LLC was born the 1st of August, 2015. Established in the Great Lakes State of Michigan, USA, where the industrialization of the US automotive industry was born in the
SCS Concept has launched a new automatic torque/angle wrench tester. The test is executed according to VDI/VDE 2645 part 2 and VDI/VDE 2647. The rotating arm is activated by
SCS Concept presented a FTY bench with a motorized wheel.
In October 2015 SCS Concept presented a FTY bench realized specially to satisfy the request of a German Automotive Manufacturer.
Blog post on 21/05/2015 Frank Lobato, SCS Products Field Application Engineer in M. Shimizu, SCS Concept brasilian partner, reports a news about the implementation, in the last April 2015, of the solution “QCOS
Blog post on 02/07/2015 SCS Concept , following its development strategy in the Far East, deepens the cooperation with the Japanese DDK taking part as expositor in the Mechanical Components and Materials Technology
Blog post on 26/08/2015 18 During the last week of July it was held at AIMCO (http://www.aimco-global.com/ ) an advanced level training about the main SCS products required by the American market. The AIMCO product
Blog post on 29/07/2015 In the last days, two SCS Concept Italia technicians carried out a periodic calibration campaign at the Ducati plant, in Borgo Panigale. 17 electronical T/A wrenches,
Blog post on 02/07/2015 SCS Concept is always looking to expand the range of its products and to innovate the existing products. Some solutions are patented, others are patent-pending. One of
Blog post on 05/06/2015 The Freedom 3 electronic wrench SPC mode (Quality Control) has a new function for routes and data synchronization. The Wi-Sync function allows the connection between the
Blog post on 05/05/2015 In april SCS Concept presented a FTY bench realized specially to satisfy the request of a German Automotive Manufacturer. Thanks to our R&D dept. SCS Concept meets
Blog post on 21/04/2015 MESTOOL, reached new potential customers (about hundred) from many different sectors at WIN Fair – International Industrial Automation Fair during 19 – 22 of March,
Blog post on 27/03/2015 SCS Concept realized two FTY test benches with tilting system. The inclined plane of FTY is used where there is the need to test nutrunners that
Blog post on 27/03/2015 An important Truck manufacturer required to SCS Concept, for one of its french plants, the possibility to carry by a transpallet a FTY test bench and
Blog post on 27/03/2015 In the first two weeks of March what was the France Road Show continued, becoming an “Iberian tour”. Starting from the Volkswagen plant in Portugal,
Blog post on 19/03/2015 http://www.win-fair.com/en/ From Europe, that is the main destination in Turkish automotive foreign trade, SCS Concept will fly to to Instanbul for the WIN Automation fair. From
Blog post on 16/03/2015 From the 23rd to the 27th of February were visited seven French manufacturing companies, including PSA and Renault Truck Defense. The SCS Concept DEMO VAN was equipped
Blog post on 09/03/2015 On the 25th-26th February took place in the Volkswagen plant in Wolfsburg the Tech Day event, dedicated to the products supplied by Apex Tool Group. The
Blog post on 17/02/2015 The visit to the Apex partner Tool Group was an opportunity to visit the NAIAS (North American International Automobile Show) that was held in those days
Blog post on 17/02/2015 Apex ToolGroup has decided to provide its Global Service network centers with the SCS Concept FTY calibration benches.A first set of five test-benches will provide the Service Center
Blog post on 17/02/2015 It was held at the Apex facility in Auburn Hills, a training session about the software VPG +. “The SCS provided training class”- said Logan Killam,
Blog post on 17/02/2015 The partnership between SCS Concept and Apex Tool has faced and solved a particular customer need. A truck European manufacturer, for its plant in the United
Blog post on 29/01/2015 An important German automotive manufacturer chose SCS Concept products for its Brazilian plant: more than 30 Freedom3 wrenches and SQnet+ software for Quality Control. On the
Blog post on 28/01/2015 An excellent result has been achieved in Brazil. An important German automotive manufacturer chose SCS Concept products for its Brazilian plant. SCS Concept provided, through its Brazilian partner
Blog post on 28/01/2015 It was held in the SCS Concept facility in Montbeliard, France, an Open House to present and give demonstration of the FTY, Multi Station Freedom and
Blog post on 28/01/2015 The new year is started, and SCS Concept welcomes it with a renewal of its price list. It’s a great news the decision of the company
Blog post on 28/01/2015 Between November and December 2014 a two weeks Road Show was held at some important French manufacturers. Renault, Smart and Airbus are only some
Blog post on 22/12/2014 The SCS Concept Micro Bench is the dynamic test bench perfect for testing and controlling wrenches and power-tools. It has several strengths: -its small size semplifies
Blog post on 22/12/2014 The perfect control of all type of powertools is assured by the SCS Concept Torque and Torque&Angle transducers. This kind of transducers can be connected to
Blog post on 22/12/2014 SCS Concept presents the forerunner of a new generation of datacollectors: it’s the DataTouch³. This instrument can be connected via wireless to various types of SCS
Blog post on 22/12/2014 SCS Concept presents two electronic wrenches for assembly stations designed to work in real time as an assembly tool on production line: Freedom³ PRW (wireless) and EWW³+ FWEPL TA
Blog post on 22/12/2014 Easyness is the keyword that best characterizes one of the SCS Concept products for checking the tightening of the joint: it’s the SCS easy electronic dynamometric
Blog post on 25/11/2014 Few days ago closed at the Donald E. Stephens Convention Center in Rosemont (Chicago – Illinois) the 2nd Annual Assembly Show. This is one of the most
Blog post on 25/11/2014 FTY is the result of a process oriented to a continuous improvement in the field of measurement technology. SCS Concept realized this dynamic test bench combining quality and easiness.
Blog post on 14/11/2014 Nine years ago SCS Concept was born in France as a distribution company in the industrial sector. Over time the company has become the supplier of
Blog post on 11/10/2014 From 19th to 23rd, June 2014, took place in Chennai, India, ACMEE 2014, the 11th International Machine Tools Exhibition. The fair was organized by Ambattur Industrial Estate
Blog post on 11/05/2014 SCS Concept, that boasts a sales network which covers the whole of Europe, South and Central America, South Africa, China and Taiwan, is extending its commercial presence
Blog post on 27/10/2014 A good cooperation between two companies is based on common values and objectives, and also on trust and reciprocal respect. Since 2007 the partnership SCS Concept–Q-direct
Blog post on 10/10/2014 On Thursday 9th October ended succesfully the 2014 edition of Motek, fair dedicated to the assembly, manipulation, rationalization and automation technologies. 950 exhibitors from 21 countries
Blog post on 03/10/2014 Its name is FTY, it’s the new bench for testing and controlling wrenches and power tools that SCS Concept will present it in the 33rd MOTEK,
Blog post on 03/10/2014 SCS Concept will be in Stuttgart at the 33rd MOTEK, the world’s leading event in the fields of for automation in production and assembly. The event,
Blog post on 03/10/2015 A blog is much more than a place for writing, it’s a space where communication is alive, it is a point of meeting with people. SCS Concept