Der Freedom4 Drehmoment-/Drehwinkel Produktionsschlüssel ist der erste elektronische Schraubenschlüssel der Welt, der die Volkswagen XML 2.1 Zertifizierung an Bord hat. Die Kommunikation erfolgt direkt und erfordert keine zusätzliche Steuerung. SCS
SCS Concept ist nun Partner der Energica Motor Company S.p.A., die alleiniger Hersteller für den FIM Enel MotoE World Cup ist. Die Energica Motor Company ist der erste italienische Hersteller
SCS Concept hat eine neue Lösung zur Nachverfolgung von Werkzeugen in Produktionsstandorten oder an Arbeitsstationen eingeführt. Der TAG ist an dem zu verfolgenden Werkzeug angebracht. Ein Satz Antennen wird in
SCS Concept stellt Spezial-Prüfbank zum Test von Drehmomentverstärker vor: Die innovativen Möglichkeiten sind: Automatischer Test von Drehmomentverstärkern Simulation des original Prozesses, indem Drehmomentverstärker mit Knickschlüssel geprüft wird Automatischer Test ohne
In Kooperation mit kompetenten wissenschaftlichen Instituten bietet der Deutsche Schraubenverband e.V. als Ergänzung zum abgeschlossenen Studium einer technischen Fachrichtung die Qualifikation Schraubfachingenieur(DSV)® an. Für geprüfte Techniker oder Meister mit nachweislich mehrjähriger
Diese Veranstaltung bildet den krönenden Abschluß der diesjährigen Veranstaltungsreihe von HS-Technik einem Hersteller von deutscher Premium-Schraub- und Niettechnik.Im Seminar „Schraubtechnik Aktuell“ vermitteln Ihnen Referenten aus den unterschiedlichsten Branchen den derzeitigen
Wir freuen uns über unseren neuen Standort SCS Concept China in Shanghai, am Puls der Automobil Werke in China.
In Kooperation mit kompetenten wissenschaftlichen Instituten bietet der Deutsche Schraubenverband e.V. als Ergänzung zum abgeschlossenen Studium einer technischen Fachrichtung die Qualifikation Schraubfachingenieur(DSV)® an. Für geprüfte Techniker oder Meister mit nachweislich mehrjähriger
Das war doch mal wieder eine richtig gelungene Veranstaltung! Über 200 Fachleute trafen sich zu intensiven Diskussionen und Vorträgen beim 13. Workshop des DSV in Dresden. Glückwunsch an das Organisatorenteam
Seit über fünf Jahren veranstaltet der Hersteller von deutscher Premium-Schraubtechnik, die HS-Technik GmbH, diese überaus erfolgreiche Informationsveranstaltung. Hier können Teilnehmer sich mit Fachleuten verschiedenster Bereiche und Unternehmen im Bereich
Nach drei Jahren Pause ist der Montage-Kongress des VDI-Wissensforums mit neuem Konzept zurück. Unter dem Motto „Digitale Schraubtechnik“ sind die Schwerpunktthemen diesmal: Digitalisierung / Iot in der Praxis Umgang mit
2019-05-22 – HDT – Bolted joints in machine and automotive assembly – Essen Zwei Tage Schraubtechnik, die in die Tiefe gehen. Unter der Leitung von Prof. Dr.-Ing. Willfried Lori (Ehemals
2019-03-13 – DSV Industrial Fastening & Assembly Workshop Dieser alle zwei Jahre stattfindende Kongress initiiert und durchgeführt vom DSV, ist im Bereich der Schraubtechnik die größte Veranstaltung dieser Art in
Als wir 2005 unser Unternehmen für hochqualitative Mess- und Prüfmittel gründeten, standen die Initialen der Vornamen Silvio, Carlo und Sam für unseren kompromisslosen persönlichen Einsatz. Daran hat sich bis heute nichts geändert – aber vieles entwickelt. 2007 kam in Deutschland die heute durch Klaus geführte Partnergesellschaft Q-direct dazu, die auf herstellerunabhängige Beratung spezialisiert ist und 2018 die Zertifizierung nach ISO 9001 erhalten hat. Durch Umfirmierung in SCS Concept Deutschland gehört sie nun auch sichtbar zu unserer internationalen Gruppe.
Am 15.12.17 nahm Herr Thomas Pappler mit seinem Team von BMW Dingolfing die erste FTY Prüfbank im neuen Design bei Q-direct in Empfang. Die innovativen, neuen Funktionen der Prüfbank haben BMW voll und ganz überzeugt und wird ihnen den Arbeitsalltag künftig erleichtern.
SCS Concept Italia hat die Akkreditierung von ACCREDIA, der italienischen Akkreditierungsstelle, als akkreditiertes Kalibrierlabor für Drehmoment, gemäß UNI CEI EN ISO/IEC 17025 und den Accredia-Anforderungen erhalten.
SCS Concept has launched a special bench for power tools test, with an enhanced swing arm
SCS Concept is proud to announce the acquisition of TECNOGI, now part of the SCS Concept Group. TECNOGI designs and manufactures dynamometric wrenches for over 20 years.
SCS Concept has launched the restyled FTY, dynamic power tool and wrench tester, with new design and improved functions. New black design New lights system One LED ring for
SCS Concept will be exhibiting at ASSEMBLY SHOW in Chicago, from the 24th to 26th October 2017 at Rosemont, Illinois, USA. The Assembly Show is an exclusive and unique exhibition of the
SCS Concept was in the first participation at the Airshow “Salón du Bourget”, with a stand presenting a sample of very interesting products for the aerospace industry, like AWT bench,
SCS Concept, with the partner DMG Torino, will be present at EXPOMAFE Brazil 2017, the exhibition dedicated to the handling, assembly and factory automation from 9 to 13 May 2017
SCS Concept, with the partner DMG Torino, will be present at Motek Italy 2017, the exhibition dedicated to the handling, assembly and factory automation from 23 to 25 March 2017
La soluzione SCS Concept per il test delle rivettatrici, composto di trasduttore di forza e analizzatore elettronico.
SCS Concept and DMG Torino have launched a new high-tech application, which projects visual instructions to guide the operator through the production process. The system is composed
SCS Concept and Q-direct participated to Motek 2016, the world’s leading event in the fields of production and assembly automation, feed technology and material flow, streamlining through handling technology, and
SCS Concept presented a special FTY with support for tools spindles. This accessory fix to the bench a spindle that cannot be handled by hands.
SCS Concept has launched a new multichannel torque/angle analyzer. It is developed to test multi-spindle tools. The number of channels can be customized, up to 12 channels. It supports all SCS
SCS Concept is Ducati Official Supplier 2016. Ducati Official Suppliers are a selected group of companies that – by supplying quality products and services to us – contribute
SCS Concept Latin America Ltda was born in early 2016. The new site is located in San Paolo, Brazil, responsible for all the countries in America Latina, where SCS Concept will increase its business
SCS Concept Americas, LLC was born the 1st of August, 2015. Established in the Great Lakes State of Michigan, USA, where the industrialization of the US automotive industry was born in the
SCS Concept has launched a new automatic torque/angle wrench tester. The test is executed according to VDI/VDE 2645 part 2 and VDI/VDE 2647. The rotating arm is activated by
SCS Concept presented a FTY bench with a motorized wheel.
In October 2015 SCS Concept presented a FTY bench realized specially to satisfy the request of a German Automotive Manufacturer.
Blog post on 21/05/2015 Frank Lobato, SCS Products Field Application Engineer in M. Shimizu, SCS Concept brasilian partner, reports a news about the implementation, in the last April 2015, of the solution “QCOS
Blog post on 02/07/2015 SCS Concept , following its development strategy in the Far East, deepens the cooperation with the Japanese DDK taking part as expositor in the Mechanical Components and Materials Technology
Blog post on 26/08/2015 18 During the last week of July it was held at AIMCO (http://www.aimco-global.com/ ) an advanced level training about the main SCS products required by the American market. The AIMCO product
Blog post on 29/07/2015 In the last days, two SCS Concept Italia technicians carried out a periodic calibration campaign at the Ducati plant, in Borgo Panigale. 17 electronical T/A wrenches,
Blog post on 02/07/2015 SCS Concept is always looking to expand the range of its products and to innovate the existing products. Some solutions are patented, others are patent-pending. One of
Blog post on 05/06/2015 The Freedom 3 electronic wrench SPC mode (Quality Control) has a new function for routes and data synchronization. The Wi-Sync function allows the connection between the
Blog post on 05/05/2015 In april SCS Concept presented a FTY bench realized specially to satisfy the request of a German Automotive Manufacturer. Thanks to our R&D dept. SCS Concept meets
Blog post on 21/04/2015 MESTOOL, reached new potential customers (about hundred) from many different sectors at WIN Fair – International Industrial Automation Fair during 19 – 22 of March,
Blog post on 27/03/2015 SCS Concept realized two FTY test benches with tilting system. The inclined plane of FTY is used where there is the need to test nutrunners that
Blog post on 27/03/2015 An important Truck manufacturer required to SCS Concept, for one of its french plants, the possibility to carry by a transpallet a FTY test bench and
Blog post on 27/03/2015 In the first two weeks of March what was the France Road Show continued, becoming an “Iberian tour”. Starting from the Volkswagen plant in Portugal,
Blog post on 19/03/2015 http://www.win-fair.com/en/ From Europe, that is the main destination in Turkish automotive foreign trade, SCS Concept will fly to to Instanbul for the WIN Automation fair. From
Blog post on 16/03/2015 From the 23rd to the 27th of February were visited seven French manufacturing companies, including PSA and Renault Truck Defense. The SCS Concept DEMO VAN was equipped
Blog post on 09/03/2015 On the 25th-26th February took place in the Volkswagen plant in Wolfsburg the Tech Day event, dedicated to the products supplied by Apex Tool Group. The
Blog post on 17/02/2015 The visit to the Apex partner Tool Group was an opportunity to visit the NAIAS (North American International Automobile Show) that was held in those days
Blog post on 17/02/2015 Apex ToolGroup has decided to provide its Global Service network centers with the SCS Concept FTY calibration benches.A first set of five test-benches will provide the Service Center
Blog post on 17/02/2015 It was held at the Apex facility in Auburn Hills, a training session about the software VPG +. „The SCS provided training class”- said Logan Killam,
Blog post on 17/02/2015 The partnership between SCS Concept and Apex Tool has faced and solved a particular customer need. A truck European manufacturer, for its plant in the United
Blog post on 29/01/2015 An important German automotive manufacturer chose SCS Concept products for its Brazilian plant: more than 30 Freedom3 wrenches and SQnet+ software for Quality Control. On the
Blog post on 28/01/2015 An excellent result has been achieved in Brazil. An important German automotive manufacturer chose SCS Concept products for its Brazilian plant. SCS Concept provided, through its Brazilian partner
Blog post on 28/01/2015 It was held in the SCS Concept facility in Montbeliard, France, an Open House to present and give demonstration of the FTY, Multi Station Freedom and
Blog post on 28/01/2015 The new year is started, and SCS Concept welcomes it with a renewal of its price list. It’s a great news the decision of the company
Blog post on 28/01/2015 Between November and December 2014 a two weeks Road Show was held at some important French manufacturers. Renault, Smart and Airbus are only some
Blog post on 22/12/2014 The SCS Concept Micro Bench is the dynamic test bench perfect for testing and controlling wrenches and power-tools. It has several strengths: -its small size semplifies
Blog post on 22/12/2014 The perfect control of all type of powertools is assured by the SCS Concept Torque and Torque&Angle transducers. This kind of transducers can be connected to
Blog post on 22/12/2014 SCS Concept presents the forerunner of a new generation of datacollectors: it’s the DataTouch³. This instrument can be connected via wireless to various types of SCS
Blog post on 22/12/2014 SCS Concept presents two electronic wrenches for assembly stations designed to work in real time as an assembly tool on production line: Freedom³ PRW (wireless) and EWW³+ FWEPL TA
Blog post on 22/12/2014 Easyness is the keyword that best characterizes one of the SCS Concept products for checking the tightening of the joint: it’s the SCS easy electronic dynamometric
Blog post on 25/11/2014 Few days ago closed at the Donald E. Stephens Convention Center in Rosemont (Chicago – Illinois) the 2nd Annual Assembly Show. This is one of the most
Blog post on 25/11/2014 FTY is the result of a process oriented to a continuous improvement in the field of measurement technology. SCS Concept realized this dynamic test bench combining quality and easiness.
Blog post on 14/11/2014 Nine years ago SCS Concept was born in France as a distribution company in the industrial sector. Over time the company has become the supplier of
Blog post on 11/10/2014 From 19th to 23rd, June 2014, took place in Chennai, India, ACMEE 2014, the 11th International Machine Tools Exhibition. The fair was organized by Ambattur Industrial Estate
Blog post on 11/05/2014 SCS Concept, that boasts a sales network which covers the whole of Europe, South and Central America, South Africa, China and Taiwan, is extending its commercial presence
Blog post on 27/10/2014 A good cooperation between two companies is based on common values and objectives, and also on trust and reciprocal respect. Since 2007 the partnership SCS Concept–Q-direct
Blog post on 10/10/2014 On Thursday 9th October ended succesfully the 2014 edition of Motek, fair dedicated to the assembly, manipulation, rationalization and automation technologies. 950 exhibitors from 21 countries
Blog post on 03/10/2014 Its name is FTY, it’s the new bench for testing and controlling wrenches and power tools that SCS Concept will present it in the 33rd MOTEK,
Blog post on 03/10/2014 SCS Concept will be in Stuttgart at the 33rd MOTEK, the world’s leading event in the fields of for automation in production and assembly. The event,
Blog post on 03/10/2015 A blog is much more than a place for writing, it’s a space where communication is alive, it is a point of meeting with people. SCS Concept
SCS Concept © Copyright 2018 | rechtsvorschriften und nutzungsbedingungen | policy privacy| Grievance policy
