SCS Journal

Grande successo per SCS Concept al MECSPE 2018, il salone dedicato alla manipolazione, all’assemblaggio e all’automazione di fabbrica, svoltosi dal 22 al 24 marzo 2018 presso Fiere di Parma...

SCS Journal

SCS Concept ha lanciato un nuovo banco speciale per il controllo avvitatori, con un braccio estendibile potenziato nelle funzionalità

SCS Journal

SCS Concept è lieta di annunciare l’acquisizione di TECNOGI, ora parte di SCS Concept Group. TECNOGI progetta e produce chiavi dinamometriche da oltre 20 anni.

SCS Journal

SCS Concept sarà presente al ASSEMBLY SHOW di Chicago, dal 24 al 26 ottobre 2017 a Rosemont, Illinois, USA. L’Assembly Show è una fiera su nuove tecnologie, strumenti e prodotti

SCS Journal

La legge di Bilancio 2017, al comma 9 dell’articolo 1, stabilisce la possibilità di un iper ammortamento al 250% per i beni acquistati che appartengano al modello della “Industria 4.0”.

SCS Journal

SCS Concept ha partecipato per la prima volta al “Salón du Bourget”, con uno stand dove ha presentato alcuni dei suoi prodotti di punta per il mercato aerospaziale: AWT, il

SCS Journal

SCS Concept, con il partner DMG Torino, sarà presente all’EXPOMAFE Brazil 2017, la mostra dedicata alla movimentazione, all’assemblaggio e all’automazione dal 9 al 13 maggio 2017 presso EXPOMAFE. Saranno mostrati

SCS Journal

SCS Concept, con il partner DMG Torino, saranno presenti al Motek Italy 2017, il salone dedicato alla manipolazione, all’assemblaggio e all’automazione di fabbrica, dal 23 al 25 marzo 2017 presso

SCS Journal

La soluzione SCS Concept per il test delle rivettatrici, composto di trasduttore di forza e analizzatore elettronico.

SCS Journal

SCS Concept e DMG Torino hanno lanciato una nuova applicazione all’avanguardia tecnologica, in grado di proiettare istruzioni visuali per guidare l’operatore durante i processi manuali.        Il

SCS Journal

SCS Concept e Q-direct hanno partecipato al Motek 2016, la principale fiera mondiale nel campo della produzione, automazione, assemblaggio, materiali, tecnologia e movimentazione industriale.     Sono stati presentati alcuni

SCS Journal

SCS Concept ha presentato un banco FTY speciale con supporto per avvitatori con mandrino. Questo accessorio permette di fissare al banco un avvitatore che non può essere tenuto a mano.

SCS Journal

SCS Concept ha lanciato sul mercato il nuovo analizzatore coppia/angolo multicanale, progettato per il test di avvitatori multipli. Il numero di canali può essere personalizzato, fino a 12. Il multicanale supporta

SCS Journal

  SCS Concept è Fornitore Ufficiale Ducati 2016.   I Fornitori Ufficiali Ducati sono un gruppo selezionato di aziende che, mediante la fornitura di prodotti e servizi di qualità, contribuiscono

SCS Journal

SCS Concept Latin America Ltda è nata a inizio 2016. La sede si trova a San Paolo in Brasile, e seguirà tutti i paesi dell’America Latina, dove SCS Concept conta

SCS Journal

SCS Concept Americas, LLC è nata a inizio Agosto 2015. La sede è stata fondata nella regione del grandi laghi del Michigan, Stati Uniti, dove è nata l’industrializzazione del settore

SCS Journal

    SCS Concept ha lanciato il nuovo banco automatico per chiavi dinamometriche coppia/angolo. Il test è eseguito secondo VDI/VDE 2645 part 2 e VDI/VDE 2647. Il braccio è azionato tramite un

SCS Journal

SCS Concept ha presentato un banco FTY speciale con ruota motorizzata.

SCS Journal

In ottobre 2015 SCS Concept ha presentato un banco FTY realizzato su specifica di una casa automobilistica tedesca.

SCS Journal

Blog post on 21/05/2015 Frank Lobato, SCS Products Field Application Engineer in M. Shimizu (partner brasiliano di SCS Concept), ha annunciato la realizzazione, nello scorso aprile 2015, della soluzione di

SCS Journal

  Blog post on 02/07/2015 SCS Concept, all’interno della sua strategia di sviluppo nel Far East,  approfondisce la collaborazione con la giapponese DDK (http://www.daiichi-dentsu.co.jp), esponendo nello stand alla M-Tech di

SCS Journal

Blog post on 26/08/2015 Durante l’ultima settimana del mese di Luglio si è tenuto presso AIMCO (http://www.aimco-global.com/) un training a livello avanzato sui principali prodotti SCS richiesti dal mercato Americano.

SCS Journal

Blog post on 29/07/2015 Negli scorsi giorni due tecnici di SCS Concept Italia hanno effettuato una campagna di taratura periodica presso lo stabilimento Ducati di Bologna. Sono stati tarati e

SCS Journal

Blog post on 02/07/2015 SCS Concept è sempre attenta ad ampliare la gamma dei propri prodotti e ad innovare i prodotti esistenti. Alcune soluzioni sono sotto brevetto, altre sono con brevetto

SCS Journal

Blog post on 05/06/2015 The Freedom 3 electronic wrench SPC mode (Quality Control) has a new function for routes and data synchronization. The Wi-Sync function allows the connection between the

SCS Journal

Blog post on 05/05/2015   In april SCS Concept presented a FTY bench realized specially to satisfy the request of a German Automotive Manufacturer. Thanks to our R&D dept. SCS Concept meets

SCS Journal

  Blog post on 21/04/2015 MESTOOL, reached new potential customers (about hundred) from many different sectors at WIN Fair – International Industrial Automation Fair during 19 – 22 of March,

SCS Journal

Blog post on 27/03/2015 SCS Concept realized two FTY test benches with tilting system. The inclined plane of FTY is used where there is the need to test nutrunners that

SCS Journal

Blog post on 27/03/2015 An important Truck manufacturer required to SCS Concept, for one of its french plants, the possibility to carry by a transpallet a FTY test bench and

SCS Journal

  Blog post on 27/03/2015 In the first two weeks of March what was the France Road Show continued, becoming an “Iberian tour”. Starting from the Volkswagen plant in Portugal,

SCS Journal

Blog post on 19/03/2015 http://www.win-fair.com/en/   From Europe, that is the main destination in Turkish automotive foreign trade, SCS Concept will fly to to Instanbul for the WIN Automation fair. From

SCS Journal

Blog post on 16/03/2015 From the 23rd to the 27th of February were visited seven French manufacturing companies, including PSA and Renault Truck Defense. The SCS Concept DEMO VAN was equipped

SCS Journal

Blog post on 09/03/2015 On the 25th-26th February took place in the Volkswagen plant in Wolfsburg the Tech Day event, dedicated to the products supplied by Apex Tool Group. The

SCS Journal

Blog post on 17/02/2015 The visit to the Apex partner Tool Group was an opportunity to visit the NAIAS (North American International Automobile Show) that was held in those days

SCS Journal

Blog post on 17/02/2015 Apex ToolGroup has decided to provide its Global Service network centers with the SCS Concept FTY calibration benches.A first set of five test-benches will provide the Service Center

SCS Journal

Blog post on 17/02/2015 It was held at the Apex facility in Auburn Hills, a training session about the software VPG +. “The SCS provided training class”- said Logan Killam,

SCS Journal

Blog post on 17/02/2015 The partnership between SCS Concept and Apex Tool has faced and solved a particular customer need. A truck European manufacturer, for its plant in the United

SCS Journal

Blog post on 29/01/2015 An important German automotive manufacturer chose SCS Concept products for its Brazilian plant: more than 30 Freedom3 wrenches and SQnet + software for Quality Control. On

SCS Journal

Blog post on 28/01/2015 An excellent result has been achieved in Brazil. An important German automotive manufacturer chose SCS Concept products for its Brazilian plant. SCS Concept provided, through its Brazilian partner

SCS Journal

Blog post on 28/01/2015 It was held in the SCS Concept facility in Montbeliard, France, an Open House to present and give demonstration of the FTY, Multi Station Freedom and

SCS Journal

Blog post on 28/01/2015 The new year is started, and SCS Concept welcomes it with a renewal of its price list. It’s a great news the decision of the company

SCS Journal

Blog post on 28/01/2015 Between November and December 2014 a two weeks Road Show was held at some important French manufacturers.     Renault, Smart and Airbus are only some

SCS Journal

Blog post on 22/12/2014 The SCS Concept Micro Bench is the dynamic test bench perfect for testing and  controlling wrenches and power-tools. It has several strengths: -its small size semplifies

SCS Journal

Blog post on 22/12/2014 The perfect control of all type of powertools is assured by the SCS Concept Torque and Torque&Angle transducers. This kind of transducers can be connected to

SCS Journal

Blog post on 22/12/2014 SCS Concept presents the forerunner of a new generation of datacollectors: it’s the DataTouch³. This instrument can be connected via wireless to various types of SCS

SCS Journal

Blog post on 22/12/2014 SCS Concept presents two electronic wrenches for assembly stations designed to work in real time as an assembly tool on production line: Freedom³ PRW (wireless) and EWW³+ FWEPL TA

SCS Journal

Blog post on 22/12/2014 Easyness is the keyword that best characterizes one of the SCS Concept products for checking the tightening of the joint: it’s the SCS easy electronic dynamometric

SCS Journal

    Blog post on 25/11/2014 Few days ago closed at the Donald E. Stephens Convention Center in Rosemont (Chicago – Illinois) the 2nd Annual Assembly Show. This is one of the most

SCS Journal

Blog post on 25/11/2014 FTY is the result of a process oriented to a continuous improvement in the field of measurement technology. SCS Concept realized this dynamic test bench combining quality and easiness.

SCS Journal

Blog post on 14/11/2014 Nine years ago SCS Concept was born in France as a distribution company in the industrial sector. Over time the company has become the supplier of

SCS Journal

Blog post on 11/10/2014 From 19th to 23rd, June 2014, took place in Chennai, India, ACMEE 2014, the 11th International Machine Tools Exhibition. The fair was organized by Ambattur Industrial Estate

SCS Journal

Blog post on 11/05/2014 SCS Concept, that boasts a sales network which covers the whole of Europe, South and Central America, South Africa, China and Taiwan, is extending its commercial presence

SCS Journal

Blog post on 27/10/2014 A good cooperation between two companies is based on common values and objectives, and also on trust and reciprocal respect. Since 2007 the partnership SCS Concept–Q-direct

SCS Journal

Blog post on 10/10/2014 On Thursday 9th October ended succesfully the 2014 edition of Motek, fair dedicated to the assembly, manipulation, rationalization and automation technologies. 950 exhibitors from 21 countries

SCS Journal

Blog post on 03/10/2014 Its name is FTY, it’s the new bench for testing and controlling wrenches and power tools that SCS Concept will present it in the 33rd MOTEK,

SCS Journal

Blog post on 03/10/2014 SCS Concept will be in Stuttgart at the 33rd MOTEK, the world’s leading event in the fields of for automation in production and assembly. The event,

SCS Journal

Blog post on 03/10/2015 A blog is much more than a place for writing, it’s a space where communication is alive, it is a point of meeting with people. SCS Concept